@cncmachining
Actief 3 jaren, 10 maanden geleden-
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
PTJ Shop is Cnc Machining Expert has 12 years experience on custom non-standard parts. As a cnc machining factory We Material research & Design and manufacture products,Material typesincluded aluminium,stainless steel,brass,copper,titanium,magnesium and plastic etc.,. our factory located in Dongguan, occupies an area Over 5,000 square meters.
Cnc…[Verder lezen] -
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
The uniform corrosion of machining inconel products can occur in acidic or hot alkaline solutions. Through this mechanism, losses can be expected and allowed in the design. When the corrosion rate of inconel products is very slow, the metal is in a passive state, generally the corrosion resistance is better with a larger chromium content, but o…[Verder lezen]
-
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
Monel alloy is a Ni-Cu series corrosion-resistant alloy, there are two types: machining monel strengthened, with Monel400, 404, R405 and other brands; precipitation hardening, with Monel K-500, 502 and other brands, commonly used Monel 400 and K-500 The mechanical properties of Monel K-500 are better than Monel 400, but the corrosion resistance i…[Verder lezen]
-
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
According to different chemical compositions, tool steels are often divided into three categories: carbon tool steel machining, alloy tool steels, and high-speed steels (essentially high-alloy tool steels). According to the use of steel, it can be divided into three categories: cutting tool steel, die steel and measuring tool steel.
Carbon tool…[Verder lezen] -
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
T7, T7A hypoeutectoid steel: has good plasticity, toughness and strength, and a certain hardness, can withstand shock and impact loads, but poor cutting ability. Used to manufacture tools that are not subject to impact load, and require appropriate hardness and wear resistance, and good toughness, such as forging dies, chisels, hammers, punches,…[Verder lezen]
-
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
Machining nitronic 60,T8Mn, T8MnA eutectoid steel: with high hardenability and hardness, but low plasticity and strength. Used to manufacture woodworking tools, hand saw blades, marking tools, rivet dies, clockwork, band saw blades, circular saw blades, coal mine chisels, masonry chisels, etc.
T9, T9A hypereutectoid steel: with higher hardness,…[Verder lezen] -
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
Used to make tools with cutting edges that do not heat up during work, tools with sharp edges and a little toughness that do not withstand impact loads, such as tools for processing wood, hand saws, hand wood tools, machine fines Wood tools, twist drills, drawing dies, punching dies, cold heading dies, screw cones, reamer tools, thread rolling…[Verder lezen]
-
cncmachinings heeft een update geplaatst 3 jaren, 10 maanden geleden
PTJ Shop is Cnc Machining Expert has 12 years experience on custom non-standard parts. As a cnc machining factory We Material research & Design and manufacture products,Material typesincluded aluminium,stainless steel,brass,copper,titanium,magnesium and plastic etc.,. our factory located in Dongguan, occupies an area Over 5,000 square meters.…[Verder lezen]
-
cncmachinings is geregistreerd als lid 3 jaren, 10 maanden geleden
